Upcycle Your Firepit Into a Table

by chadderby in Outside > Backyard

714 Views, 11 Favorites, 0 Comments

Upcycle Your Firepit Into a Table

20160607_214813.jpg
I made a table using a fire pit stand, and decking material.

Supplies

20160605_203154.jpg

For this project I used some composite decking material and a old fire pit stand, all stuff that I got out of a dumpster. I also used wood screws and four right angle brackets.

Table Top

First I cut the decking material to about the size that I need it, then I laid the pieces in to a square. I traced the fire pit stand circle onto the decking material. Using a band saw I cut out the shape of table top, screwed all the pieces together. I used extra pieces of decking material on the bottom of the table top for support.

Table Base.

On the fire pit base I drilled four holes in the center/top edge of the legs and bolted on the four right angle brackets.

Finishing

After both the stand and the top was finished I bolted on the table top to the stand using the four brackets. I then sanded down the edge of the table until it was smooth. Final touch paint the stand with a new coat of black paint.

This was a nice easy afternoon project that did not cost any money, everything I used, I found out for the trash or was leftover from another project.