Upcycle Lamp

by TrashWoodshop in Workshop > Woodworking

1202 Views, 10 Favorites, 0 Comments

Upcycle Lamp

Image 28.png
ep#7 - Bed Side Lamp

Matirials :

all i used was scraps and imagination this is an idea for you guys! you can also use any of the Ideas this was made on the Fly no planing as always.

Cut the Stuff.

Image 2.png
Image 5.png

cut the wood to size needed i used the old shelf. Cut it in to a shape you like .

On the lamp pole i did a groove so the cable can pass trough it .

Holes

Image 3.png
Image 10.png

Do the holes for the Pole and the light switch.

Trails for Cables

Image 6.png
Image 18.png

I used the Router to make the trails for the electronics !

Shade

Image 16.png
Image 17.png
Image 12.png

I used old negatives for the shade and make sure you give enough space for you cand to chage the light bulb !

The first one i made was round and failed to be able to change the light.

Suport for the Cam

Image 20.png
Image 22.png

just used a screw that is able to mount the camera !

Feet

Image 23.png
Image 24.png
Image 25.png
Image 26.png

Cut some scrap of wood to make the feet , make sure they are High enough.

Finish

Image 21.png
Image 27.png

Paint with varnish and connect everithing, Look good and you done!!

Check My social media and make sure you subscribe !!

Snapchat : trashwoodshop

twiter: https://twitter.com/trashwoodshop

Instangram : https://www.instagram.com/trashwoodshop/

Twitch: https://www.instagram.com/trashwoodshop/