Umbrella Samurai Sword
by MehtlliK in Craft > Costumes & Cosplay
2813 Views, 11 Favorites, 0 Comments
Umbrella Samurai Sword



This is a DIY of the Rain Cutter: The Umbrella Samurai Sword
I have made this using an old black umbrella.
now you can make one too with your umbrella with these steps...
The Materials Needed:

.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
The Materials for this project is very simple
You'll need one of the following:
A steel pipe (small in diameter and can fit the screw of the umbrella)
a vinyl cloth
flat black shoe laces
old pair of black jeans
an old umbrella
and a sewing kit
Now the Handle:
.jpg)

.jpg)
The handle goes like this
first unscrew the handle of the umbrella and screw the steel pipe in place,
and cover it with the part of the old black jeans covering all of the steel pipe
put some clothing on the side of the pipe in order to bulge it and to make it ellipse and not round for the wrapping of our next step.
The Samurai Wrapping

.jpg)


The samurai lace wrapping is done in the picture above as shown,
now take the flat black shoe lace and do the wrapping...
Now the Sheath
.jpg)







In order to do the sheath you must follow the following steps
first : wrap the umbrella with the vinyl cloth and sew it
second: Make the strap, the strap must be a long one longer than the sheath itself, it's 3 inch by 15 inch, make some adjustments in order to fit your needs and style
third: Make some buttons and other additional designs
Now Your Done!



Enjoy your very own umbrella samurai sword, and cut through rain like a samurai or a ninja
it also can be use for cosplay, for protection in case you need some other things to do with it, and namely for style!...