Ultrasonic Ranger Robot

by FollowMyJump in Circuits > Arduino

1075 Views, 6 Favorites, 0 Comments

Ultrasonic Ranger Robot

Watch VIDEO first.

This is a small robot with wooden shell. It would shout at you when you get close to it.

Laser Cutting

IMG_7935(0).JPG

Get a 5mm wooden board first and cut it through laser cutting.

Assemble the Shell

IMG_7949(0).JPG

IMG_7954(0).JPG

IMG_7956(0).JPG

IMG_7957(0).JPG

IMG_7959(0).JPG

IMG_7963(0).JPG

IMG_7964(0).JPG

IMG_7955(0).JPG

IMG_7958(0).JPG

Fix hinges and magnets with screws as picture shows.

After fixing them you can fold this box perfectly.

Then fix the trimming with rivets.

Electronic Modules

IMG_7966(0).JPG

614961cf3e7fff1bd1c49a9a8853b4cb.image.530x397.jpg

ef1616c92ff363e3d4d361273dbe0143.image.530x397.jpg

429981208996dace8cd664dbdaeda233.image.530x397.jpg

06132f7211236f0225ad27e4dcc683ff.image.530x397.jpg

5e1308c71a5a1ba04dd6bfda52bd7948.image.530x397.jpg

fd4441f889a6a8bce54ce334cdb6cce4.image.530x397.jpg

Firstly, you should get following modules.

Seeeduino Lotus

Grove - LED Bar

Grove - Ultrasonic Ranger

Grove - Mini Fan

Connect these modules with controller board as picture shows.

DONE

IMG_9277(1).JPG