USB Toaster

by EduardoGE in Circuits > USB

969 Views, 5 Favorites, 0 Comments

USB Toaster

20221112_143835.jpg
20221112_143904.jpg
20221112_143931.jpg
USB Toaster

For this project I made a USB toaster with fidget buttons because I wanted to have all my USB devices organized for school and also have something I can fidget with while doing homework.

Supplies

3D Printer Filament, USB Hub, USB Sockets, Compression Springs, Glue

3D Print

20221104_155255.jpg
20221104_155305.jpg

3D print all the parts for the toaster. (Chassis, Buttons, Support Pieces)

Buttons

Insert the button with the spring and cylinder. Glue the cylinder piece to the support piece inside.

USB

20221104_155321.jpg

Splice off the heads off the USB hub and replace them with vertical USB sockets and solder them with each corresponding wire.

USB Hub

Insert the USB Hub inside the toaster and either screw in the socket into place or hot glue it.

Chassis

20221104_155244.jpg
20221111_131252.jpg

Glue both halfs of the toaster chassis.