USB Mini Drill
This USB powered drill is perfect for wood, PCB boards, bakelite, cardboards and many more.
Very simple to make, a perfect utility tool for DIY hobbyists.
This tool besides a power bank can also be used by plugging in any 5v USB mobile charger.
Things You Need
Things you need:
Cable, USB plug, Mini switch, Mini motor, Electrical connector, Small drill
Connect the Switch
Glue the switch on the + side of the engine.
Connect Cable to Motor
Solder the red cable (+) to the switch and the white (-) to the engine , remember to solder the switch.
Connect Cable to USB
Solder the red cable (+) to the + USB and the white (-) to the – USB.
Finish it off with tape and shrink tubing,
don't tape the switch!
Connect the Drill
Cut the ends of the electrical connector.
Glue the drill and motor together in the connector.
Ready!! Let's Take It to the Test!
See the end of the video for test!!