USB Dust Plug - Leaf
Buy at Shapeways
3D Printed and Tested.
It's used to seal the idling USB ports on your electronic devices, protecting them from dust, coffee / water spill etc. The plug part seals the USB port.
Please note:
USB ports must have 10mm horizontal or 7.5mm vertical clearance, if you want to use multiple plugs.
3D Printed and Tested.
It's used to seal the idling USB ports on your electronic devices, protecting them from dust, coffee / water spill etc. The plug part seals the USB port.
Please note:
USB ports must have 10mm horizontal or 7.5mm vertical clearance, if you want to use multiple plugs.