Two Person Phone
![IMG_0125.JPG](/proxy/?url=https://content.instructables.com/F5Q/OV3X/LEQ0TQL8/F5QOV3XLEQ0TQL8.jpg&filename=IMG_0125.JPG)
![IMG_0124.JPG](/proxy/?url=https://content.instructables.com/FBX/R84J/LEQ0TQL7/FBXR84JLEQ0TQL7.jpg&filename=IMG_0124.JPG)
This is a Bluetooth speaker that I made in class. Called the two-person phone.
Supplies
Soldering First Parts
![IMG_0101.JPG](/proxy/?url=https://content.instructables.com/FMV/V5M7/LEQ0TQ0E/FMVV5M7LEQ0TQ0E.jpg&filename=IMG_0101.JPG)
In this step, you can solder the hardwire connections to the electronics.
Slicing the Print
![a.PNG](/proxy/?url=https://content.instructables.com/FDJ/ER3Y/LEE9BW5X/FDJER3YLEE9BW5X.png&filename=a.PNG)
![Capture.PNG](/proxy/?url=https://content.instructables.com/F0X/H3TL/LEQ0TQQT/F0XH3TLLEQ0TQQT.png&filename=Capture.PNG)
In this step, you will have to open up a slicer. You use the files to create the sliced parts. I used the Cura lulzbot slicer for this print.
Printing the Print
![IMG_0084.JPG](/proxy/?url=https://content.instructables.com/FJI/APIK/LEQ0TQH8/FJIAPIKLEQ0TQH8.jpg&filename=IMG_0084.JPG)
using a printer put in the storage drive. make sure you have enough filament and activate the print
Finalize the Soldering
![unnamed.jpg](/proxy/?url=https://content.instructables.com/F8E/YU53/LEE9BW4T/F8EYU53LEE9BW4T.jpg&filename=unnamed.jpg)
once the prints are done you can attach the speakers and finish the soldering
Hot Glue Galore
![IMG_0099.JPG](/proxy/?url=https://content.instructables.com/F1K/145F/LEQ0TQ0F/F1K145FLEQ0TQ0F.jpg&filename=IMG_0099.JPG)
![IMG_0109.JPG](/proxy/?url=https://content.instructables.com/F5G/XOIQ/LEQ0TQ0N/F5GXOIQLEQ0TQ0N.jpg&filename=IMG_0109.JPG)
use hot glue to attach the two parts of the speaker
Activating the Speaker
![IMG_0127.JPG](/proxy/?url=https://content.instructables.com/F5H/R0ZY/LEQ0TQNT/F5HR0ZYLEQ0TQNT.jpg&filename=IMG_0127.JPG)
![IMG_0128.JPG](/proxy/?url=https://content.instructables.com/FTK/ZGPW/LEQ0TQNU/FTKZGPWLEQ0TQNU.jpg&filename=IMG_0128.JPG)
Turn it on