Two Faced Pac Man Pillow.

You ready go ahead and follow the steps.

So this is my first indestructible just saying if there is a mistake then tell me but not in a mean way please.

So step one is pretty simple just search for it or copy mine.

Any way cut it out once your done it should look like the second picture.

Then cut out the eyes make shore you cut around the pupil though.

Now its time to cut it out.

Remember its two sided so you don't need too much of the same color so pick out two colors and go with them.

Get some felt and trace around the stencil don't trace the eyes because you need black for those.

Now its my mistake for tracing the eyes so don't copy me. :-)

All you got to do is cut it out use REALLY sharp scissors for this because fabric is really tough.( i dind't think so to)

So now you need the eyes to cut out the blacks of the eyes just do the same thing except on black felt and

trace the eyes not the pupils. But anyway grab some white felt and trace the pupils of the eyes then snip em out.

Ok now grab your pupils and the other part and stick them on i used a special glue for fabric.

I also used a Popsicle stick to smudge the glue around the eyes.

The pupils only need a dab of glue then you stick it and let it dry for about 5 hours before sewing together

do the same thing again for the other side but with a different color.

now you have both sides done Sew the sides together except for a little spot on the side about 2'' long.

Stuff it up until it's pretty full.

then sew it up tight.

if there is some stuff hanging cut it off i trimmed the edges on mine so you might do that

Your pillow is done thank you for making it there you go. :-)