Turn Any PS2 Contoller Into an Ipod Nano Stand!
by poparoo4 in Circuits > Apple
2808 Views, 4 Favorites, 0 Comments
Turn Any PS2 Contoller Into an Ipod Nano Stand!
Got an old PS2 controller? Make It Into a Ipod Nano Stand!
It's quite self explantory, thats why theres not many instructions.
This is just something that took me one evening, but it looks quite good.
Im not gunna pay for a new ipod for you if you hurt it while doing this.
Sorry For The Bad Quality Pictures, Did't Realize They Where Bad Till I Looked At Them On My PC!
It's quite self explantory, thats why theres not many instructions.
This is just something that took me one evening, but it looks quite good.
Im not gunna pay for a new ipod for you if you hurt it while doing this.
Sorry For The Bad Quality Pictures, Did't Realize They Where Bad Till I Looked At Them On My PC!
What You Will Need From the Garden Shed!
- A PS2 Contoller
- Ipod Nano
- Soldering Iron
- File
- Screw Driver
Disect!
Take Apart The Contoller!
Put a Hole in It!
Mark where you need to make the hole. Then use something to cut through it! I used a soldering iron, then I sanded it down with a File l. I also put a bit of masking tape in the corners because it was making my ipod all mucky.
You don't have to watch the full vid but you know... just so you get the idea...
You don't have to watch the full vid but you know... just so you get the idea...
Put Together!
Put all the electronics back together. You may have to remove some things to make it go back together.
Your Finished!
Slot your Ipod in, grab a cuppa and admire your hard work.
- Things extra you could do: