Tube Man

This is a minature version of the tube man that is mostly used in car dealerships to catch the attraction of new clients.

Materials:

1. Tissue paper
2. 9 volt Battery
3. Tape
4.  Repurposed fan
5. Top half of a water bottle 
6.  Alligator cables
7. Sharpie 
8. Switch

For this project you will not need a lot of things. You are going to be able to find most of the materials at home.

• Get tissue paper, measure that everything fits properly in its position before putting together  

• Cut the paper in half and then roll it up a little bit then tape it and make like a tube with one hole on the bottom

• After doing the little man you start setting up the battery and wires so the fan can be able to function 

• Then tape the wires and the batteries so the fan is able to function and then create a switch.  

• When the fan can be turn on and off then create a base so the fan can go on that base and the base be able to sustain it 

• Then put the fan on a bottle so the bottle can go through the little man and create the right ventilation needed so the man can stay up.

• Tape the end between the bottle and the man and done. Look at the man being filled with air.