Trophy,Flag Holder and Wine Glass From Plastic Bottle

by aakashkarekar in Craft > Art

3555 Views, 0 Favorites, 0 Comments

Trophy,Flag Holder and Wine Glass From Plastic Bottle

20180430_161156.jpg
20180430_163354.jpg
20180430_162248.jpg

Most of us often see trash as a waste or a pile of unused items and do not think how valuable it can be if we try to make something out of it .

And yes guys,this "Trash to Treasure" contest is the best place to display your creative minds and make people believe,how trash or waste items (especially plastic bottles) can be turned into valuable items instead of just disposing it off and polluting the environment.

I made a small trophy,country flag holder and wine glass from old plastic bottle.It's very easy and i think everyone should give it a try.

Some Basic Tools and Materials Needed

20180428_123811.jpg
20180430_152742.jpg
20180430_160135.jpg

TOOLS

  • Scissor
  • Screwdriver
  • Plier
  • Knife
  • Soldering iron

MATERIALS

  • Plastic bottles
  • Screws
  • epoxy

Building Plastic Bottle Trophy

20180430_154420.jpg
20180430_154600.jpg
20180430_154734.jpg
20180430_154947.jpg
20180430_155033.jpg
20180430_155205.jpg
20180430_155258.jpg
20180430_155339.jpg
20180430_155350.jpg
20180430_155400.jpg
20180430_155431.jpg
20180430_155441.jpg
20180430_155843.jpg
20180430_160736.jpg
20180430_161145.jpg
20180430_161156.jpg
20180430_161214.jpg

Take two bottles.Cut one bottle from top and other one from bottom.We will need the upper part of bottle(the conical one) and the other one whose bottom has been cut.

Now take the left over plastic part of bottle and cut it into small piece and then roll it like a pipe.Insert one end of rolled pipe into lower plastic part (the conical one) and then push the other end into the plastic part whose bottom has been cut.

Cut two long strips of plastic and bend both its end.Make hole at both the ends as well as on the trophy.Take the handle and fix it to the upper part of trophy with screw and nut.

You can decorate it by painting the trophy or with any decorating material.

Building Plastic Bottle Flag Holder

20180430_154420 - Copy.jpg
20180430_154600.jpg
20180430_162639.jpg
20180430_162808.jpg
20180430_163640.jpg
20180430_163030.jpg
20180430_163354.jpg
20180430_163414.jpg

Take one bottle.Cut the plastic bottle from top and also from the bottom.Cut the left over centre part of plastic bottle as well.Make a small cut at the centre of plastic part and Roll it like a pipe and insert its one end into the conical part of bottle.

Open the edge part and stick your country flag on it.You can even decorate it by painting on it.

Wine Glass From Plastic Bottle

20180430_161555.jpg
20180430_162008.jpg
20180430_162038.jpg
20180430_162208.jpg
20180430_162223.jpg
20180430_162248.jpg
20180430_162258.jpg

Cut plastic bottle from bottom as well as from top.Make hole on the cap and at the centre of bottom part.Fix the cap with screw and nut to the bottom part and cover the screw with epoxy so the liquid will not leak.Now fix the conical part to the cap and its done.

And You Are Done!!!

20180430_161156.jpg
20180430_163354.jpg
20180430_162248.jpg

Its very simple to make and i hope you will use the trophy in your local sports tournaments.ALLL THE BESTT!!!!

You can keep the flag holder on your office desk.

Enjoy your dinner date with wine in plastic bottle wine glass.