Trophy- Lasercut

This design was developed for competitions but is adaptable for all applications.

This design consists of 3 different trophy models and is fully customizable to your own application.

You'll need:

• a laser cutter
• the material you want to make it from.(We used MDF with a thickness of 9mm)
• Wood glue

First check that you have two legs for each trophy

Put a small amount of wood glue on the legg

Slide the leg in place at the bottom of the trophy and repeat this on the other side

Let is rest for one hour to make sure the glue is dry

Make as many as you want and enjoy!