Triple Spatula
![Screenshot 2024-05-01 113326.png](/proxy/?url=https://content.instructables.com/FZB/ZDUC/LVQOQ546/FZBZDUCLVQOQ546.png&filename=Screenshot 2024-05-01 113326.png)
I've created a triple spatula that helps you flip burgers very efficiently. With this product, you can grill a lot more efficiently and won't have to waste time trying to flip your burgers one by one.
Supplies
![71C07okb1OL._SX466_.jpg](/proxy/?url=https://content.instructables.com/F9F/VT8B/LVQOQ56G/F9FVT8BLVQOQ56G.jpg&filename=71C07okb1OL._SX466_.jpg)
All you need is a 3D printer.
Base Outline
![kkkk.png](/proxy/?url=https://content.instructables.com/FD4/65W0/LVQOQ56S/FD465W0LVQOQ56S.png&filename=kkkk.png)
![lkbdf kdf.png](/proxy/?url=https://content.instructables.com/FRZ/8RN1/LVWEH7EH/FRZ8RN1LVWEH7EH.png&filename=lkbdf kdf.png)
The first thing I did was outline the handle, the hand pad, and the spatula holder which in this case is 3 spatula holders. I encountered many problems while making this and ended up with this final piece. I spaced out the spatula holders so they don't touch each other. Then I made the handle 4 inches as shown in the picture above. After, I made the pad 2 inches long and 0.6 inches wide. Lastly, I made the spatula holders 0.8 inches long on both sides then tilted them at a 45-degree angle and 0.4 inches then added 3 small neck handles for the spatula which are 2 inches long and 0.4 inches wide.
Extruding the Spatula Parts and Face Blending the Hand Pad
![b.png](/proxy/?url=https://content.instructables.com/FOS/VCWH/LVWEH7NE/FOSVCWHLVWEH7NE.png&filename=b.png)
After I made the base outline I decided to extrude the handle, the spatula holders, and spatula necks by 0.2 inches while I extruded the hand pad by 0.43 inches. Also, I chose to face-blend the hand pad so it can have smooth edges.
Spatula Spoon Outline
![hgj.png](/proxy/?url=https://content.instructables.com/F3A/M9VE/LVZ9D9UZ/F3AM9VELVZ9D9UZ.png&filename=hgj.png)
Next, I made the spoon of the spatula which in this case, I made 3 of them, and the spoons' dimensions are 2 inches long and 1 inch wide.
Extruding the Spoon
![yk.png](/proxy/?url=https://content.instructables.com/FZ8/QGP0/LVZ9D9TY/FZ8QGP0LVZ9D9TY.png&filename=yk.png)
Afterward, I extruded the spoons to 0.05 inches and filleted the back corners so they could have a smooth edge.
Assembling Everything Together
![nbnn.png](/proxy/?url=https://content.instructables.com/FUT/DX77/LVZ9DA8X/FUTDX77LVZ9DA8X.png&filename=nbnn.png)
Lastly, I assembled everything and made the spatula as shown above.