Triforce IPhone Case

by Kimerserd in Living > Organizing

1619 Views, 5 Favorites, 0 Comments

Triforce IPhone Case

2013 01:25.jpg
2013 01:25.jpg
This AWESOME case goes very well with all of your rolls and special attacks! (It also goes well with matching ring and necklace)

This Triforce iPhone case is easy and simple to make =D Better yet, it only costs 20 rupees: YAY!

This case will take up very little space in your inventory sooo that means you have more room for smells, letters, bugs, rupees, weapons, and everything that you could possible put in your inventory!!!!

Save travels!!!! Don't let Midna bother you tooo much!!!!!! =D

What U Need........

2013 01:25.jpg
~Black duct tape

~Gold duct tape

~iPhone case

~Scissors (if u want to cut the duct tape, I just rip it)

Base Color

2013 01:25.jpg
2013 01:25.jpg
Rip or cut off some pieces of black duct tape and cover the iPhone case with it. Make sure that you don't cover up the button and camera holes. (Try your best to make it look neat with no air bubbles. Your's should look as good or better than mine)

Gold Triangle

2013 01:26.jpg
2013 01:26.jpg
2013 01:26.jpg
2013 01:26.jpg
2013 01:26.jpg
2013 01:26.jpg
2013 01:26.jpg
2013 01:26.jpg
Next, cut off a piece of gold duct tape roughly 2 inches. Then, fold it until it looks like a good triangle. When u have it to a triangle, make sure that it fits or is a tiny bit bigger than your iPhone case. Keep it close because we are going to need it for the next step

Sorry, I Lost the Photos for This Step Because the App Crashed =[

2013 01:26.jpg
Rip or cut off a piece roughly 1 inch and fold it just like u did for the gold triangle. Place it on the gold triangle UPSIDE DOWN and flip the whole thing over. Tape down the BLACK corners coming off to the BACK of the gold triangle. Place it on top of iPhone case to see how it looks.

Placing the 'Connector'

2013 01:26.jpg
2013 01:26.jpg
2013 01:26.jpg
For this step, you can either use glue or duct tape (I used duct tape because it was easier and faster than glue). Flip the duct tape Triforce over and roll up some duct tape sooo that both sides are sticky. Push the sticky duct tape down on the back of the Triforce and get ready to the final steps......

Finishing Touches

2013 01:26.jpg
2013 01:26.jpg
You can just put the Triforce on the iPhone case if u want........

~~~~OR~~~~

You can add a design to the case also (like you can put 'Legend of Zelda' or 'Link' or what ever u want)

'You Found a Rupee!'

2013 01:26.jpg
2013 01:26.jpg
You are done now!!!! 'You found a rupee!' Now go out on your adventures with your new Triforce iPhone =D

What are you waiting for? Go save Princess Zelda!