Trash Bucket

Turn an old bucket into a trash can using a few nuts and bolts. The bolts are great for holding plastic bag handles. Plus this project is really easy!

You'll need
-an old bucket (mine had sprung a leak)
-2 bolts
-4 nuts
-wire cutters
-needle nosed pliers

Remove the handle with your wire cutters. If the handle is too strong, you can cut the plastic bucket just below the handle and slip the handle out.

Slide one nut onto the bolt, then, put the bolt through the hole in the handle. Use needle nosed pliers to attach a nut to the open end of the bolt, securing it in place.

Use the bolts to hold the handles of the plastic bag and attach to the bucket. And your easy trash can is ready to be filled with garbage... or materials for your next craft project.