Transformers Damage Counters - 3D Printed
by g3holliday in Workshop > 3D Printing
376 Views, 4 Favorites, 0 Comments
Transformers Damage Counters - 3D Printed
![DSC_0045.JPG](/proxy/?url=https://content.instructables.com/FSK/Q4AE/KN8W3EWS/FSKQ4AEKN8W3EWS.jpg&filename=DSC_0045.JPG)
![TCG Assortment.png](/proxy/?url=https://content.instructables.com/FJY/PIKQ/KN7GS1AO/FJYPIKQKN7GS1AO.png&filename=TCG Assortment.png)
I recently got a 3D Printer, and I decided it would be fun to print some Transformer damage counters.
Let's get to it!
Supplies
- 3D Printer
- Filament
- Computer
Preparing to Print
![TCG Assortment.png](/proxy/?url=https://content.instructables.com/FGP/1OJR/KNABL6CW/FGP1OJRKNABL6CW.png&filename=TCG Assortment.png)
The STL files are here: TinkerCad
Use these settings:
- Infill: 10%
- Supports: None
- Bed Temp: 44 C°
- Extruder Temp: 125 C°
I recommend putting masking tape on the printer bed to make the counters easier to get off.
Let's Print!
![DSCN5659.JPG](/proxy/?url=https://content.instructables.com/FG7/0N92/KN7GS2N9/FG70N92KN7GS2N9.jpg&filename=DSCN5659.JPG)
Print the file.
It should take a couple of hours, but it may vary by printer.
Expect to lose a few in printing.
Done!
![TCG Assortment.png](/proxy/?url=https://content.instructables.com/FWR/9V3P/KN8W3EV1/FWR9V3PKN8W3EV1.png&filename=TCG Assortment.png)
![DSC_0120.JPG](/proxy/?url=https://content.instructables.com/FXJ/VRM5/KN8W3EW4/FXJVRM5KN8W3EW4.jpg&filename=DSC_0120.JPG)
This was easy, right!
Thank you for viewing!
Merry Making,
g3holliday