Transformable Extended Workbench Part 5

8. accessories

8.1 connection

material:

Profile 20 x 40 mm
4 x screw M6 x 60
4 x M6 nuts
4 x washers for M6

On the table specifies the location of the use of adapters.
In the profile table and drilled holes Ø 7 mm
Each fitting is attached with 2 screws

Note:
These fittings are designed to be anchored accessories

9. accessories

9.1. vice
9.2.light
9.3.magnifier
9.4.outlet
Each of the tables has its own outlet. Left Part 6 x ,Right Part 5x

10. completion

First of all I apologize for my English. I hope that is clear enough to the manufacturing process. If any questions I answered on my site. You can also visit my page.
https://www.facebook.com/Homemodetransformation?ref=hl

 
I would like to thank for help:

-My family, who supported me and my work

-Rado-Kovič-u for wing nuts and bolts, which gave me so I could finish the table.

http://www.kovic.si/kovic_plastika_o_podjetju_slo.htm
url: www.kovic.si 
-Andrenšek Domnu for film processing
-Tadeju Prančič-u  to assist in recording

Ps: 2 questions
Is it true what I said at the beginning ?
You like ?