Training Your Speed of Folding Clothes

This product is for the people who want to learn how to fold cloth or the people who want to train their speed of folding cloth. This is easy to make and easy to learn.

Here is what you need to bring for your product

For outside product making-

Big hard cardboard 60cmX70cm

Utility knife X1

Rough paper 40cmX220cm

Tape X1

Screwdriver X1

Marker or pen X1

Inner circuit-

1. Breadboard x1

2. Arduino uno x1

3. LED x3

4. Long wires X6

5. Short wires X6

6. Resistance X3

Take the big cardboard that you prepared and use a pen or marker to draw the shape of a cloth. (size should be the same as the picture right middle so you can fold a proper cloth) Than use the utility knife to cut through the line to just draw on the cardboard. Use the screwdriver to poke three hole on the cardboard. (The hole on the cardboard should be somewhere like the right below)

This step is just using the rough paper to pack the whole cardboard all over around. If you want to range out the part that you are folding is also alright (shows at the right picture)

If you plug the wires, LED, resistance like what I show in the picture it should be alright on working. If you want to connect on the cardboard, you need to get away long more wire so you can pull and stick on the place it should be. So the wires you use to connect the LED can all change to long wires. Other than that use short wires will be fine and it's also easier to organize.

Copy and paste the link below onto the Arduino then you can make the machine work.

https://create.arduino.cc/editor/cynthiawu01163/b1fed013-0ff7-4886-8202-d3f7eb921cf1/preview