Toy Weapons Display

I had a bunch of toy weapons laying around some I made some I bought I plan on making all the weapons in some form or another that I will eventually add to this. The wood I used was plywood. A 2 foot by 2 foot piece. I added some paint and screws and that's pretty much it. Depending on where you hand it will determine how you will hang it. I have a bow and arrow, blow gun, rubber band gun, marshmallow shooting gun, and a spear. Make sure your screws are long enough to hold all your stuff. I think it looks better when all the screws are the same. you could choose to paint them if you want.

examples of toys

Supplies

plywood

screws

paint

Tools

saw

marker

straight edge

paint brush

sand paper

Before cutting take your toy weapons and lay them on your wood. Make sure you give your self enough from so that they are spread out. If you plan to add more weapons save space for them.

I had a four foot piece of of wood and cut it in half.

I used a tape measure to measure 2 feet and marked the line using a straight edge and marker.

I then took the circular saw and cut the plywood.

Then sanded down the edge where made the cut.

Then paint the plywood I used a brush you could use spray.

Let Dry

Add screws where your weapons will sit.