Tower Fall

by Innokick in Workshop > Laser Cutting

145 Views, 0 Favorites, 0 Comments

Tower Fall

tour de Niels large.jpg
tour de Niels copie.jpg
Etape 1.png

This Projet is inspired from the "SOS Oustiti" game. It's an wooden adaptation on the mediaval theme.

The aim is to collect as many pebble as possible. The main difference is that the player has to roll a dice to determine which wooden tongue he is allowed to pull, increasing the fun !

Supplies

mode d'emploi jeux.jpg

As a basis we used a :

  • wooden board multi-ply 1100x800x3 mm

In addition, the following tools were used :

  • 3x u-nail 1,6x 13 mm
  • hammer
  • adhesive tape
  • Some thread

For the colors we chose but it is up to your preferences

  • Dupli Color - grey for the walls
  • Dupli Color - brown for the door
  • Fly Color - Acryl base for the wooden tongue

And we chose the following accessories

  • 5mm sugar marble
  • 1x 6 faces dice

Finnally we printed the rules on paper and protected them with plastic

1_Decoupe_Laser.jpg
1_Peinture_Pierre.jpeg
1_Peiture_Porte.jpeg
1_Peinture_Languette.jpeg
2_Anneau de passage.jpeg
3_Charniere.jpeg
4_Accessoires.jpeg

The first step is to load the file in the laser cutter.

Separate the different pieces (optionnal : apply paint)

Use the hammer to put 3 u-nails, 1 on the front wall + 2 on the door at the basis

Use some tape to attached the front wall and the door from the inside face leaving about 1mm between the door and the front wall for the door to rotate

Assemble the different walls, back pannel then left and right then front pannel with the door

Make a knot on the door nails with the thread and pass it though the front wall loop


Your game is ready to start ! Use the rules to start a new play.

Watch the Video

Prototypage Vidéo Tower Fall

This video explains how to play Tower Fall, give it a watch and enjoy playing!