Toothpaste Squeezer

This toothpaste squeezer is easy to make with the step by step instructions that I provide you with. The toothpaste squeezer will help you squeeze out all your toothpaste out of the tube.

1. Charged computer
2. 3D printer

The first step to making a toothpaste squeezer is to start off with a rectangle. The rectangle should be 94.40 MM long and 29 MM wide. The triangle corners should also have a radius of 0.8.

Then you will add a sphere to the middle of the rectangle. You want to stretch the sphere to 63.50 MM long and 6 MM wide. Once the sphere is in the middle of the rectangle you want to make the sphere a hole so it will go through the rectangle. Then you want to hold your mouse down and slide over the two pieces and let go. Once the two pieces have a blue lining around then you want to go to the top right corner and hit the combine button. The button will light up black if the two pieces are selected properly. The button looks like a square and a circle combined.

Once you have the sphere in the rectangle you want to make the grips. You want to add two more spheres with the length of 77.88 MM and width of 20.00 MM. You want to move the spheres over to the long sides of the rectangle. Once the spheres are by the long sides of the rectangle you want to hover both the spheres over the rectangle but you do not want the sphere to go all the way through the rectangle. Once that is done you can go ahead and group the parts together.

Now that you have your toothpaste squeezer, let's make it portable. You now want to get a cylinder and make it 25.40 MM high and a diameter of 10 MM. You want to put the cylinder through the top left corner of the rectangle and then make it a hole. Now, you can group the parts together again.

The final step is to add your personal touch to your toothpaste squeezer. Now you add the “text” on to the work plane and then you would type your first name or your last name. Then, you would move it to the center right of your rectangle and make it a hole so it shows up in the piece. Now you can group the name to the rest of the piece.

Now that you finished your toothpaste squeezer it is time to 3D print it so you can use it! This picture is the final result after you 3D print it.