Tone Control for Tpa3116d2 2x50Watt Stereo

Based on the previous article about "Tone Control for PAM8610". This time I will use the tone control to another amplifier. I will use the amplifeir class-D TPA3116D2 Stereo.

even without additional accessories such as tone controls, the sound produced by this amplifier is already good. But in this article I want to try adding a tone control and see the sound results this amplifeir produces.

The materials I use here are mostly ready-made modules, namely:

1* Tone Control Stereo

1* TPA3116D2 2x50Watt Stereo

Installation diagram as usual. the sequence of installation is as follows:

Audio Source -> Tone Control -> Amplifer -> Speaker

what is special about the tone control that I use is PCB Tone Control I ordered from PCBWay.

why did I choose PCBway, because By making PCB on PCBway you can get High Quality 10 PCs PCBs for only $ 5 & new member First order Free: www.pcbway.com

To print on PCBway, PCB design needs to be converted into gerber format.

You can download the gerber file below, I provide it for those of you who want to make it too.

PCB order steps on PCBWay:

1. Visit the website: www.pcbway.com
2. Click PCB Instant Quote
3. Click quick-order PCB
4. Upload the gerber file by clicking "+Add Gerber File" and wait until the gerber file is finished uploading

5. Set the PCB specifications as you wish, starting from the number of PCBs, the number of layers, thickness, color and others.

6. After that, look at the left, it will display the estimated cost, processing time and delivery service selected.

7. Click Save to cart

Assemble one by one the modules according to the diagram given.

The final result can roughly be seen in the image above. Let's go to the next step to listen to the sound of this amplifier.

Enjoy reading and watching the video. Thank you for stopping by this article. if you have questions, just write in the comments column