Toaster

We made a small, custom toaster in Fusion 360. It was our first time using Fusion 360, and our main goal was to gain a deeper understanding about what fusion is, and how to use it.

We wanted to make something globally recognizable that could be used as a key chain, Christmas ornament, ect. This realistic model functions similar to an actual toaster. The lever actually moves up and down, allowing things to pop in and out of the toaster.

We are juniors at Berkeley High School.

• Fusion 360
• 3D printer
• Filament
• Tools to remove supports

1. Make a box
2. Dimensions: 150mm long, 100 mm wide, 105mm long
3. To round the corner, click each edge, and press "Modify", then "Fillet"
4. Enter 25mm as radius. Corner type should be "Rolling Ball"

1.Sketch two rectangles on top of the toaster.

2.Click "Finish Sketch" then "Extrude" them down into the toaster

1. Outline the toaster's control panel on the front. This can be unique to you.
2. Cut out a rectangle where the lever will go

1. Create a "Lever" for the toaster, it can be unique to the shape you designed
2. Next, move the lever inside of the toaster body, and center it
3. You can add more details if you want, but the base toaster design is set!