To Put Stress to Rest

Have you ever felt stressed and looking for a stressed ball and it turns out that it's not squishy enough or crunchy enough? Well, I hear you and I agree. Some are too hard and others hurt when you squish them. I was determined to find the goldilocks of them all. So I made my DIY version of it. It combines crunchy and squishy at the same time! It consists of four balloons, leaves, and last but not least water. Now that I have given you a brief introduction there is one more thing to ask. Are you ready to To Put Stress to Rest?

4 normal sized balloons

4 crunchy leaves

2 ounces of water

Gather 4 regular-sized balloons. 3 balloons must be the same color and one must be a different color.

Fill 1 empty balloon halfway up with water. With the water inside, tie up the end of that balloon tight enough so no water leaks out.

Take a second balloon of the same color. Stretch out the opening. The opening must be able to fit the water-filled balloon inside of it.

Insert the water-filled balloon into the opening of the stretched-out balloon (knot side down). Tie balloon tightly, with the original water balloon inside of it- Now you have your “double bubble”.

Gather the third balloon (of the same color) and gather your 4 crunchy leaves. Now you will put the leaves into the 3rd balloon. Shove the weak leaves in first followed by the crunchiest ones.

Take your “double bubble” balloon and insert it into the balloon containing the crunchy leaves and tie it tight- now you have the “Three-in-one”.

Now gather your 4th balloon, which should be a different color. Stuff the “three-in-one” into the new balloon. This should be a protection layer. Tie the knot tightly.

When you give it a squeeze it will turn a different color because of the balloons inside. Remember when your feeling stressed, give it a squeeze!