Tiny Wooden House on a Rock
![IMG_20190728_122602-01.jpeg](/proxy/?url=https://content.instructables.com/F2T/7BO3/JYIYWWR5/F2T7BO3JYIYWWR5.jpg&filename=IMG_20190728_122602-01.jpeg)
Hi All,
In this instructables I am going to share how to make miniature wooden house. It is tiny and super fun to make. needs a patients and time.... Main items used in this instructables was found easily. I did not buy anything....
I worked on this project every night after dinner for 2 to 3 hrs ( last 1 week ).. I certainly learnt a lot
What Do You Need ?
![IMG_20190723_211449-01.jpeg](/proxy/?url=https://content.instructables.com/F59/ZHQB/JYIYWWHQ/F59ZHQBJYIYWWHQ.jpg&filename=IMG_20190723_211449-01.jpeg)
![IMG_20190727_172908-01.jpeg](/proxy/?url=https://content.instructables.com/FDJ/2OES/JYIYWWLZ/FDJ2OESJYIYWWLZ.jpg&filename=IMG_20190727_172908-01.jpeg)
Material
- A rock or stone : I found mine on road
- Popsicle sticks : Mine were thinner than regular fund them at the coffee station
- PVA glue or fevicol
- Cutter
- Tooth picks
- Skewers
- Acrylic paints etc
- Dried bamboo twigs from my apartment garden
No power tools needed, just you imagination
Prepare
![IMG_20190723_221113-01.jpeg](/proxy/?url=https://content.instructables.com/FSN/R3YL/JYIYWWHT/FSNR3YLJYIYWWHT.jpg&filename=IMG_20190723_221113-01.jpeg)
- Wash the rock, bamboo twigs and let them to dry
- Glue several popsicle stick to make few thin wooden planks / sheets
- Let the glue dry before we start the next step
- Add supports as needed
House
![IMG_20190724_221906-01.jpeg](/proxy/?url=https://content.instructables.com/FHS/GLEW/JYIYWWHW/FHSGLEWJYIYWWHW.jpg&filename=IMG_20190724_221906-01.jpeg)
![IMG_20190724_222104-01.jpeg](/proxy/?url=https://content.instructables.com/F2P/E5EN/JYIYWWI0/F2PE5ENJYIYWWI0.jpg&filename=IMG_20190724_222104-01.jpeg)
![IMG_20190727_092916-01.jpeg](/proxy/?url=https://content.instructables.com/FWG/ERV0/JYIYWWI9/FWGERV0JYIYWWI9.jpg&filename=IMG_20190727_092916-01.jpeg)
![IMG_20190727_093853-01.jpeg](/proxy/?url=https://content.instructables.com/FGD/CRU1/JYIYWWIF/FGDCRU1JYIYWWIF.jpg&filename=IMG_20190727_093853-01.jpeg)
![IMG_20190724_225333-01.jpeg](/proxy/?url=https://content.instructables.com/FZ0/8H2C/JYIYWWIO/FZ08H2CJYIYWWIO.jpg&filename=IMG_20190724_225333-01.jpeg)
![IMG_20190725_000500-01.jpeg](/proxy/?url=https://content.instructables.com/F2A/3L2J/JYIYWWJK/F2A3L2JJYIYWWJK.jpg&filename=IMG_20190725_000500-01.jpeg)
- Cut the wood sheets as shown above
- Glue them together
- I used paper tape to hold them together and added a support inside to prevent it collapsing
- Let it dry for 2 hours
- Add details like doors, chimney and base etc
Tips :
- You could choose a different shape for your house
- To simplify this step, you could take a big piece of wood and shape it into a house using saw and then sticking popsicle picks for details
Path on the Rock
![IMG_20190725_163120-01.jpeg](/proxy/?url=https://content.instructables.com/FHW/AP7L/JYIYWWJT/FHWAP7LJYIYWWJT.jpg&filename=IMG_20190725_163120-01.jpeg)
![IMG_20190725_163526-01.jpeg](/proxy/?url=https://content.instructables.com/FBL/IA7M/JYIYWWK3/FBLIA7MJYIYWWK3.jpg&filename=IMG_20190725_163526-01.jpeg)
![IMG_20190727_165750-01.jpeg](/proxy/?url=https://content.instructables.com/F46/OM5W/JYIYWWKR/F46OM5WJYIYWWKR.jpg&filename=IMG_20190727_165750-01.jpeg)
- The idea is that this rock is a hill or a island in water
- We have a wooden path which goes around the rock
- This path has is has moss etc
- I started at the top and slowly added each piece
- Added support where the popsicle stick was touching the rock
- After every piece, you need to wait for 2hrs to dry
- Once done paint the patch with watery green and brown
Tips :
- If you are comfortable using super glue, this step gets done faster
- I always end up gluing myself and making change later is difficult
- While one piece was drying I would work on another, like painting or tree etc
Boat
![IMG_20190727_190544-01.jpeg](/proxy/?url=https://content.instructables.com/FUP/LZKV/JYIYWWMW/FUPLZKVJYIYWWMW.jpg&filename=IMG_20190727_190544-01.jpeg)
![IMG_20190727_221836-01.jpeg](/proxy/?url=https://content.instructables.com/F3F/YT7F/JYIYWWO0/F3FYT7FJYIYWWO0.jpg&filename=IMG_20190727_221836-01.jpeg)
![IMG_20190728_115141-01.jpeg](/proxy/?url=https://content.instructables.com/F52/D5DX/JYIYWWON/F52D5DXJYIYWWON.jpg&filename=IMG_20190728_115141-01.jpeg)
![IMG_20190728_115051-01.jpeg](/proxy/?url=https://content.instructables.com/FHX/5H8I/JYIYWWP8/FHX5H8IJYIYWWP8.jpg&filename=IMG_20190728_115051-01.jpeg)
- Take 4 to 5 pieces of popsicle sticks between 3 to 4 cm
- Glue them together and leave them to dry
- Once dried, use a sandpaper and cutter to give this a boat like shape
- Leave the boa's bottom flat, so that it could stand upright without an additional support
- Add the central mast and two sails
- Glue them and let it to dry
Paint Job
![IMG_20190728_122503-01.jpeg](/proxy/?url=https://content.instructables.com/F8C/6IRA/JYIYWWQH/F8C6IRAJYIYWWQH.jpg&filename=IMG_20190728_122503-01.jpeg)
![IMG_20190727_165946-01.jpeg](/proxy/?url=https://content.instructables.com/F81/CQD8/JYIYWWKE/F81CQD8JYIYWWKE.jpg&filename=IMG_20190727_165946-01.jpeg)
- Using Acrylic paints ( I you may choose different colors)
- Paint brown ( water wash ) to give the wooden finish
- Paint green, let it dry
- Now paint teal Blue, leaving some of the green to still be visible like moss
- For the roof, i rubbed a little black paint
- I accidentally painted the sails, so had to retouch them with whit paint
Tips
- You could try different color scheme
- While my looked amazing with a white background, on a darker shelve I will have to change the colors
Detailing
![IMG_20190727_170624-01.jpeg](/proxy/?url=https://content.instructables.com/FEB/769D/JYIYWWL4/FEB769DJYIYWWL4.jpg&filename=IMG_20190727_170624-01.jpeg)
![IMG_20190727_180048-01.jpeg](/proxy/?url=https://content.instructables.com/FU1/0969/JYIYWWLK/FU10969JYIYWWLK.jpg&filename=IMG_20190727_180048-01.jpeg)
![IMG_20190727_174251-01.jpeg](/proxy/?url=https://content.instructables.com/F0O/V58G/JYIYWWMF/F0OV58GJYIYWWMF.jpg&filename=IMG_20190727_174251-01.jpeg)
![IMG_20190728_113101-01.jpeg](/proxy/?url=https://content.instructables.com/FGD/WEJY/JYIYWWPU/FGDWEJYJYIYWWPU.jpg&filename=IMG_20190728_113101-01.jpeg)
![IMG_20190727_190033-01.jpeg](/proxy/?url=https://content.instructables.com/F4Y/6AD9/JYIYWWNH/F4Y6AD9JYIYWWNH.jpg&filename=IMG_20190727_190033-01.jpeg)
- Before we start detailing, we need to glue the house and level it
- I added dummy supports for the house at the back and front
- Added tress ( bamboo twigs)
- Added few more branches by gluing more twigs
Tips :
- Using Super glue could definitely speed up the process
- Take a pause after every step... rest a bit and then continue
Once everything is dried, place the new tiny wooden house to display on the showcase or find a spot
Future Improvements
- Add led lights, why ? Because I love them and will be more visible on a darker shelf
- Add more details to Tree, fence to path and a swing
Please share your suggestion, comments and how can I improve further