Tiny Surf

This quick tutorial will explain you step by step how to make your tiny surf in a precise way to make it beautiful and usable ! Enjoy the tutorial !

Estimated preparation time: around 20 minutes.

This is a fun project. Bored of long and tiring car rides, this is the solution now you can have fun with your homemade tiny surf. Just open the window and surf the air.

First of all, before starting this tutorial, you will need:

- a pair of scissors

- some thread

- cardboard or another rigid surface

- stuff to decorate your board

- stuff to make a hole (paperclip)

Draw a schematic of the surfboard on your cardboard using the following measurements.

-Cut out the schematic following the pencil line you have drawn.

-Decorate your surfboard according to your tastes and desires. Have fun and let your imagination run wild!

Make a hole in the back of your surfboard with a paper clip for exemple.

Pass a thread about 10cm long through the hole and tie a knot to secure the thread. At the other end of the thread form a loop which will serve as a safety device, attached to your finger.

-All you have to do is have fun with it during long car journeys.