Tiny Screwdriver

Ever needed a mini screwdriver?
No? Me either! But It was fun to make!
If you are intrigued, read on!

What you will need

• Wooden dowel- your choice of size
• Sandpaper
• 18 Gauge wire
• Hammer
• Anvil -or- as I use, a mallet
• Drill with small bit
• Hot Glue gun
• Saw
• Common sense

First, Take your dowel and cut off about 1/2 inch off of the end.
Then sand the tops until they are smooth.
Sand the sides so it is still a circle but thinner.

Now, cut the wire size to your liking.
Make sure there's room for the drilled part.
Now drill a hole, almost all the way through.
Then hot glue it into the hole.
Flatten one side of the wire

Now, use that sucker somehow!
Paint if wanted