Tiny Freidy's Vehicle
![freidy.jpg](/proxy/?url=https://content.instructables.com/F1X/ORE3/JGGTGLGU/F1XORE3JGGTGLGU.jpg&filename=freidy.jpg)
IN THE STONE AGE,
Once upon a time......
The Freidy has an Vehicle.
i am wondering about how to remove
the power crowbar indeed !
so, that this iable make the tiny simple
(1.5v) running robot part_4.
1.easy,
2.1.5v AAA batt.
3. homemade,
4.electronic toy,
5. DIY .
Materials
![DSC_0133.JPG](/proxy/?url=https://content.instructables.com/F8G/WG8G/JFX0EE23/F8GWG8GJFX0EE23.jpg&filename=DSC_0133.JPG)
1) 1.5v AAA batt. * 1
2) cotton swab x 6
3) DC motor * 2(1 good and 1 from trash bin)
4) wires * 2
5) Aluminum foil roller *1(from trash bin)
6) cardboard * 1
7) foaming * 1
TOOLS :
cutter * 1
Cutout Legs
![F67YS3EIRLQHVTV.jpeg](/proxy/?url=https://content.instructables.com/FXX/F7EY/IRPPMZQZ/FXXF7EYIRPPMZQZ.jpg&filename=F67YS3EIRLQHVTV.jpeg)
![DSC_0267.JPG](/proxy/?url=https://content.instructables.com/FN2/UQRF/IRXT2WOQ/FN2UQRFIRXT2WOQ.jpg&filename=DSC_0267.JPG)
use cutter to cut out two 8 cm small roller(s) as the robot wheel(s).
Circuit
![RC01.png](/proxy/?url=https://content.instructables.com/FRF/J9HC/JGGTGLNW/FRFJ9HCJGGTGLNW.png&filename=RC01.png)
connect 2 copper wire from one motor to AAA battery.
cut the foam into some slices.
fill the foam into the roller between battery.
fill the foam into the roller between dc-motor(s).
cut 2 pieces, use cutter to cutout the two crowbar(s),
just cut 80%.
do not cut the cotton head off !
Make the Seat and the Roof
and then connect to the dc motor's shaft(s).
HAVE FUN !