Tinkercad Witch and Cauldron

Hello, my name is Matthew, I am a junior at Cedar Grove High School in Cedar Grove, New Jersey. I am very interested in 3d Printing as I have taken two courses at Cedar Grove High School. As Halloween was only few weeks away from the start of my project, I decided to make a witch and a cauldron.

Throughout this guide, there will be step by step instructions, tools, and software you will need to make this.

Hardware

• Glue
• Black paint
• Neon green filament
• Grey filament
• Deburring tool
• 3d Printer

Online

• Tinkercad
• Cauldron PNG
• https://www.cleanpng.com/free/cauldron.html

I choose to use Tinkercad as it is a reliable program. I then created 3d Designs

This is the link I used

I split the witch in half to make easier to print. If I did not split it, it would take much supports and may ruin the print

I printed the cauldron upside down for an easier print

I used a deburring tool to get rid of the elephants foot. I did this so the edges are a lot more smooth.

I used glue to put the witch together. I then let it dry for 20-30 minutes

I used black paint to paint the witches body. I painted 2 coats for the most optimal color.

I put glue on the top of the cauldron and carefully placed the bubbles on top. I then let it dry for 20-30 minutes