Tinkercad Puzzle!
![Screenshot 2020-08-15 at 2.42.55 PM.png](/proxy/?url=https://content.instructables.com/FHJ/P77P/KDVO9VQG/FHJP77PKDVO9VQG.png&filename=Screenshot 2020-08-15 at 2.42.55 PM.png)
If you easily get bored in the car and you like puzzles then you should totally make this!
Supplies
Tinkercad, 3d printer
Holder
![Screenshot 2020-08-14 at 7.18.01 PM.png](/proxy/?url=https://content.instructables.com/FVR/A305/KDVO9VQJ/FVRA305KDVO9VQJ.png&filename=Screenshot 2020-08-14 at 7.18.01 PM.png)
First, you make the puzzle holder. Start with a regular cube and stretch it out to a length and height of 200 and a thickness of 8. Next, take another cube to make a hole and place it 4 down 190 wide and 190 lengths and center it in the face of the first cube. That's all for the holder!
The Puzzle
![Screenshot 2020-08-15 at 2.37.28 PM.png](/proxy/?url=https://content.instructables.com/FG3/T1LH/KDVO9VQH/FG3T1LHKDVO9VQH.png&filename=Screenshot 2020-08-15 at 2.37.28 PM.png)
For the puzzle what you first want to do is create your image. Now place it onto a square that has been stretched out to length and width of 189 and a height of 3. Next, we will slice the puzzle up into nine pieces. To cut the puzzle we will make a cube, turn it into a hole, and make it 190 wide, 3 high, and 0.01 thick. Create four copies and align as shown in the picture. Merge the cuts to the picture. TADA YOU MADE A PUZZLE!