Tinkercad Ping Pong Paddle, and Ball 3D Print
by taylor.fournel in Living > Toys & Games
362 Views, 0 Favorites, 0 Comments
Tinkercad Ping Pong Paddle, and Ball 3D Print
![4703EBFA-C7CD-4722-B4C9-DE4C35FCED4C.jpeg](/proxy/?url=https://content.instructables.com/FZM/K30A/KOACWP2Z/FZMK30AKOACWP2Z.jpg&filename=4703EBFA-C7CD-4722-B4C9-DE4C35FCED4C.jpeg)
In this instructable I will teach you how to make a 3D printed Ping Pong Paddle, and Ping Pong ball. I will also have a step to explain the rules and how to play the game if you do not know.
Supplies
3D printer, and a device that can use TinkerCad.
Making the Paddle Handle
![42EFCA68-196D-48E0-9B02-EFED85F23575.jpeg](/proxy/?url=https://content.instructables.com/FDC/RNZ2/KOACWP5S/FDCRNZ2KOACWP5S.jpg&filename=42EFCA68-196D-48E0-9B02-EFED85F23575.jpeg)
First, Grab a box. Then change the height to 10mm, the length to 50mm, and the width to 20mm. This will act as the handle of the paddle that you use to play Ping Pong.
Making the Paddle Head.
![A403A8B9-FA60-4B44-83C5-4482EEE05319.jpeg](/proxy/?url=https://content.instructables.com/FCO/CPVX/KOACWP9S/FCOCPVXKOACWP9S.jpg&filename=A403A8B9-FA60-4B44-83C5-4482EEE05319.jpeg)
Grab a Cylinder. The height of this cylinder is going to be 10mm just like the handle. However, the length is 90mm, and the width is 85mm.
After you make the handle and head you should put them together so that the handle is barely inside the head.
The head is what you aim to hit the ball with.
After you make the handle and head you should put them together so that the handle is barely inside the head.
The head is what you aim to hit the ball with.
If You Need a Ball You Can Print One
![68C3668E-27FF-4729-B86D-4FF363699D50.jpeg](/proxy/?url=https://content.instructables.com/FTV/3B6G/KOACWPN9/FTV3B6GKOACWPN9.jpg&filename=68C3668E-27FF-4729-B86D-4FF363699D50.jpeg)
To print a small ball if you don’t have one you can make a sphere, and make the spheres height, length, and width to 20(If it is not already). The ball is what you use to score points.
How to Play Ping Pong
![05657118-C10F-4891-8FC8-347FF3795B5B.png](/proxy/?url=https://content.instructables.com/FDH/TAKQ/KOACWPTI/FDHTAKQKOACWPTI.png&filename=05657118-C10F-4891-8FC8-347FF3795B5B.png)
In ping pong you have two paddles, and the ball. You start the game when someone throws the ball into the air and hits it with their paddle. This is called the serve. In Ping Pong you have to try and get the ball past your opponent. However you have to allow the ball to bounce once on your side before you can hit it back after the serve, and you have to hit the opponents side of the table before you get the ball past them. You are also not allowed to let your ball get caught on the net in the middle of the table. These are the basic rules, if you want you can search up more rules.