TinkerCAD Log Cabin





In this project you will learn on how to make a basic TinkerCAD log cabin That is simple and very easy to make
Open the Work Plan

Open your TinkerCAD and start a new project and name it, Log Cabin
Make the Base of the Cabin

To make the cabin you need to have a base.
to do this you need to grab a box and make it take up the whole work plain
Start the Cabin





to start the cabin you need to extend a cylinder to any length you want and do the same for another connected to the other end of the 1st cylinder
after you do that you must group and copy a paste ONLY the cylinders and make the first level of the walls
after that you must group the WALLS together and stack(after copying and pasting) them untill there are 5 to 4 levels on the Cabin
Door





to create the door first you need to put a hole in the wall of the Cabin then take one box and a sphere and combine them to make a door and install it to the Cabin
Add-Ons (you Can Skip If You Want To)


on the inside of the Cabin you can put in furniture or other decor in from the Hangout space section in Tinker CAD
The Roof



For the roof you must have a triangle roof and 2 polygon hole shapes
1st Adjust the roof so it fits your Cabin
2nd put the polygon holes in the front and back flat end of the roof and combine all of your shapes
All Done!!

Now you have a completed TinkerCAD 3D log Cabin
With this build you can also make a Campground like the one I sort of started here in the picture above
thanks for building this with me!