TinkerCAD Car (Basic)

here were gonna make a simple undetailed car in TinkerCAD that is very simple. Their are 2 videos for this project. just follow the steps I did in the videos and the steps in this Instructables.

watch part 1

watch part 2

first we need to make the body of the car and we do that by using a normal box to start. make it 65X146X56. and give it a step value of 13.

for this simply make some holes using some cylinders and make them the length of the body to cover the hole area.

now take a box and make it 129x120, as a hole and give it a radius of 5.33 and group them all together

simply now take some boxes and put them at an angle of your choice and then create the model you want based on my pictures above.

you can also use a round roof shape to do this.

now take a round roof and place it in between the to carved sides of your car. now group them together

now take a wheel and size it to fit your car. then copy it three times and place them in the 4 areas you made earlier.

now take a cylinder, size it, copy it, and put 1 in each space in between the tire areas on the bottom of the car

nice job! your now done!