Tinker Cad Twister

This miniature flying disc is a great way to learn about 3d printing and flight. With less than two hours of printing and minimal setup you can take to the skies with this twister.

- 3d printer

- 3d printer filament (PETG is preferable but not necessary)

- 20,000-30,000rpm rotary tool (we used a Dremel)

- screw-head for the rotary tool

- adjustable wrench

Print the twister and the tool-head with 20-30% infill.

Use the rotary tool and an adjustable wrench to screw the screw-bit into the tool head.

Crank you rotary tool to max rpm and watch your spinner take off like a rocket! CAUTION: be aware of your surroundings when launching the spinner.

https://www.tinkercad.com/things/4Qu9xaJXXl7-twist...

Click on this Tinker Cad link and customize this design.