Tinker CAD Beginner 's 1st Project - Spanner

Hey Guys

So in this instructable we are going be doing The Tinker CAD Beginner 's 1st Project - Spanner

1. Select the right shape for the shaft from the shapes panel from the right side of the screen.

2. Now with the help of the property window resize the shape with the below given parameters

Length - 10 width - 100 Height - 5

3.Use the radius parameter in the property window and give the curved edges to the rectangular shaft which is placed on the workplane = Radius - 5

1. Select cylinder shape from the shapes panel from right side of the screen and resize all the required parameters so the the cylinder will look like this and align it to the center of the shaft.

2. Now select the Hexagon shape from the shapes palette and select the shape to hole.so that we can create a profile for the spanner

3. Now align the hexagon shape into the cylindrical shape so that it will look like the wrench.

4. Now group all the shapes together so that the end result will look like this.

😁😀