Tin Can Stove

So to make the Tin Can Stove i used a 3 lbs columbian coffee can and an old soup can that i found in my families recycling.

for this i used

-needlenose pliers

-wirecutters

- and a drill

(the drill bit size is up to you as you will see later)

I dont have a picture for this but on the bottom of the smallest can you should take the bottom off.

you can use a can opener or just cut them with wire cutters like me.

cut 4 sections out of the top of the can to let airflow into the interior.

i had very limited tools so my cuts are a little rigged.

use a sharpie and the can to trace a circle.

then use your drill and drill holes around the circle (drill bit size is up to you)

insert the smaller can into the hole

use the drill to make 4 more slits on the lower sides of the big can