Thung Thung Thung Sahur

When I started with this project I was going to make a BayMax which was going to be an alarm for students so they could be ready on time to have a great day at school but Last 2-3 days for the project I came up to make "Thung Thung Thung Sahur" its all over my phone and I had no ideas so Thung Thung Thung Sahur he is their to keep you up to day and keep you out of trouble. When the robot gets a vibe you doing bad he is going to say " THUNG THUNG THUNG" and swing its bat and tell you to do better and be better.

1. cardboard
2. Hot glue gun
3. 3D PRINTER
4. circuit board
5. Servo with wheel

We need to get cardboard that is not used and we need to start cutting. make sure your cuts are straight and clean because when you glue it some parts are uneven. we need to make 2 legs, we need the body, we need the 2 arms and when we get our body and legs we make sure they are even and the legs and body are stable.

When having all the parts we need use some sandpaper so the cuts could be smooth and be easier for us to hot glue it together. We make sure our hot glue gun is hot and we get to glue make sure you glue everything right and make sure the whole legs are even and the body and legs are stable. After we need to add the arms, make sure the glue is on point and theirs space for the left arm to be able to move.

We need for our robot to be able to move and the left arm to be able to swing with its bat. For the left arm to be able to move/swing we need to add the servo add inside the body, make a hole on the arm so its able to move and the arm to have its swing bat. To add the Circuit board all I did was tape the bottom part and all nails to the top part.