[Thumb]nail Portraits - (laser Etch Your Fingernails)

by lamedust in Workshop > Laser Cutting

83223 Views, 116 Favorites, 0 Comments

[Thumb]nail Portraits - (laser Etch Your Fingernails)

nailetch12.jpg
dalinailpress.jpg
good.jpg
Throughout history there has been a hotly contested division between men of great importance. Rooted from a question pondered in their youth: beard - or mustache? Deeply concerned with their facial ornamentation, these men of highest standing were the Rogain to history's receding hairline. Dali chose the razor mustache while Monet chose a dirt-smear beard. Zappa went for a bikers long horned lip hanger while ZZ-Top chose a beard to tie their pants to. Each with their own motives and each leaving their nuzzle rubbings on the face of facial attire.

In this instructable you will learn how to do fingernail portraiture. One method involves pain and the potential for scarification, while the other pleasure (or mostly the absence of pain). By the end of this instructable I hope you will gain some appreciation for the beard and mustache and their everlasting body slam on the face of history. Or at least look at your fingernails as a place where you can express more than just a color.


Gather Materials

supplies.JPG
nomime.jpg
If you wake up every morning looking at your hands and wondering how you can make them more expressive without taking up the exhausting art of miming, than these are the things you'll need:

1) A laser cutter
2) A good idea
3) Nail Polish
4) Nail polish remover
5) Press on nails
6) Double sided tape
7) A strong magnet

Mustache Mafia

Picture 57.png
Stalin1.jpg
FWNietzscheSiebe.jpg
Nietzsche187a.jpg
Zappa.jpg
zappakid.jpg
Salvador_Dali_NYWTS.jpg
Salvador_Dal%C3%AD_1939.jpg
Charles-chaplin_1920.jpg
CC.jpg
The title of this etching is "Clash of Titans" a nod to the epic figures on my opposing hands. One is the Mustache Mafia and the other is the Band of Bearded Brothers. These next two steps will introduce them:

The Mustache Mafia are quite a handful. Before etching them into our body let's start by getting some background information on these wildcats.

1) Stalin
We begin with little Joey Stalin. This man and his monstrous beard has featured in some awesome videos. He made it cool for communists to have a 'stache... and considering the fact that papa Marx was all about the beard it was a tough sell in deed.

2) Friedrich Nietzsche
Nietzsche's iconic mustache is often mistaken for a blow-dried rat held between his upper lip and his nose. But this image is usually propagated by his jealous enemies who are justifiably shocked by his awesome beard mustache skills. His philosophy had the same powerful haphazardly life affirming individualistic notions that one feels his mustache must be squeaking.

3) Frank Zappa
Zappa rocks and he's shown clear allegiance to the Mustache Mafia since day 1. With two love handles like that it must have been hard to beat down the women lining up offering their ceaseless butterfly kisses. This clearly has twisted Zappas mind, and comes back quite clearly in his lyrics:
A little green monkey over there
Kills a million people?
That’s not fair!
Did it really go that way?
Did you ask the c.i.a.?
Poor man died of prostate cancer.

4) http://en.wikipedia.org/wiki/Salvador_DaliDali
Dali is one greased up pig in a barrel of sausage. No one can keep their hands on this slick fox. This surrealist painter surpassed fame and was a legend in his own time. Some say this was due to his connections with the MM (mustache mafia), but it's hard to deny this man was a genius. Check out his work. His mustache also proved essential as feelers during his final years, imagine a man crawling on all fours moving long wispy antenna. Surreal... but true.

5) Chaplin
Sir Charles Spencer Chaplin was nearly shot being mistaken for Hitler. But after a quick miming session managed to silently subdue the confused American Assailant and continued his slapstick walk. Now if you don't believe in the power of a good mustache, imagine Chaplin without one. You can't, he simply vanishes into a hat.

The Band of Bearded Brothers.

tutankhamen1.jpg
disney_aladdin_genie2_16_9_large.jpg
Karl_Marx_001.jpg
James_Abram_Garfield%2C_photo_portrait_seated.jpg
Fidel-1960.jpg
ZZ_Top_Live.jpg
Frederick_Douglass_portrait.jpg
The Band of Bearded Brothers are an ancient group going back millennia. Jesus wasn't the first cool bearded guy, there was Moses before him and King Tut. Aristotle, and the genie from Aladin had beards too. Why this mysterious group emerged and what their goals are is unclear. Some believe they're a strange cult attempting to solve life's great questions in order to make it boring. Nonetheless let's meet our left hand associates.

1) Karl Marx
It's little known, but as a child Karl really enjoyed playing with his Meccano set and his parents believed he'd become an engineer. He even built the first electric guitar and started a band called K Marx the Spot. Things were looking good for Marx and his band. They had a new fresh sound and their first cafe jam was well received they left the venue with enough money for the tram back to town. Soon afterwards during plans of a country wide tour, the drummer's mom grounded him because "this music stuff wont get you anywhere in life". Thoroughly discouraged Karl set out to purify music by starting the "Real Musicians Don't Make Money" movement, which slowly evolved over time to what we would now consider the Communist movement.

2) President Garfield
President Garfield holds the distinction of being one of the four presidents who sported a beard. Current attitudes to beards would prevent a fully bearded man from spending more than an afternoon discussing oil wells at the White house. Garfield was not bearded as a youth, and became president once his beard fully matured. This is disappointing because he died six months later, thankfully we still have this nice picture saving his facial hair preferences forever.

3) Fidel Castro
May or may not be a zombie.

4) ZZ-Top
Over the top and thankfully not topless. These tip tapping horn tooters are tomorrows today. And their tintinnabulation displays the tambour of a different drummer. With beards that become bat caves and guitars that screech for scratch they are the rock of my roll. And how.

5) Frederick Douglass
Frederick Douglass shows us that your life may be a cup of unfiltered run off from the six street in San Francisco, but you can still be nominated as vice president to a ticket that's bound to lose - and look good while doing it. His fur was the envy of his white overseers and they often would attempt to shave him. But he escaped their treachery and grew a ferocious beard to top them all. This won him great esteem and is now on a stamp. Sweet.

Prepare Images.

caliperize.JPG
Picture 60.png
Picture 61.png
Picture 62.png
Picture 63.png
Now that we've narrowed down our candidates and have them numbered 1 - 5 on each hand. One being the thumb and 5 the pinky you need to gather some images for etching. The basic process is to paint your fingernail with a block backdrop and then etch a contrasting solid image into it. The bolder the character and the more recognizable their face is the better your results will be.

First an important step that I neglected the first time I tried to do this. Measure your fingernail for each graphic. Frank Zappa is going on my middle finger so we need the width to be .56 inches wide. [picture 1] My nails are more long than wide, so making a square this size should work.

Once you have your image open it up in your favorite photo editor. I'm using photoshop, but this type of editing can be easily done with GIMP. You'll need to open your file and change it's size to the width square of your fingernail and up the resolution to 300 at the same time. [picture 2]

Next to make sure that this image will burn away the nail polish you need to turn the file into pure black and white, you do this by thresholding it. [picture 3]

Lastly since we are removing black nail polish and showing a lighter patch of fingernail underneath we will need to invert the image in order to keep the visual effect correct [picture 4 & 5].

Prepare Your Canvas

paint.JPG
I have abnormally large fingernails which cover nearly the entire ends of my fingers. This provided me with a suitable area for my nail etching, but first we must paint...

Here is a video of me painting my nails for the first time, here's some tips I've gathered:
1) Don't glop a whole lot on, if it's too think just let it dry and repaint it.
2) Start from the center furthest back on your cuticle and paint one side then the other.
3) Have a bottle of polish remove handy for the little spills.
4) Don't worry if you get it on your skin, that will wash out after a shower.

Test and Print

getaroundsecurity.JPG
openimage.JPG
positionupsideown.JPG
P1070319.JPG
You begin by loading your image into your favorite laser cutter enabled program. We use Corel Draw here at instructables.com. Invert your image and and position it near the bottom of the laser cutter. Use some masking tape to cover the tray where the design should fall. This will be your guide. If you use an Epilog Mini you can should take off the cover and put a magnet where the cover's magnet should land. This will enable you to use the laser cutter with the top off. Also you need take the front grill off so you can insert your hand.

Run the laser cutter with a low powered setting to see where the laser lands. Once you are sure of the location you can then place your finger through the opening in the laser cutter right on top of the previously etched portrait. Lower the tray so the finger's highest point is in focus and set your laser's power for 50% power and 100% speed on the raster setting. This is an important number to get right because otherwise you end up with a serrated - not etched - fingernail.

You can watch the intro video to see it all in progress. Here's the youtube link:


Etch Press on Nails

presson.JPG
presson2.JPG
pressonstick.JPG
pressonetch.JPG
dalinailpress.jpg
Now that we've done fingernails, I like making things that other people would consider doing. So to make this instructable more accessible, I've also done it with press on nails:

Materials:
Press on nail kit
Double sided padded sticky tape.
and material list from step 1

You first need to paint the nails, this is slightly more difficult because these fingernails are not attached to a body. You can use the applicator from the kit to stick to the bottom of the nail and hold it temporarily as you fill out the nail. Apply two coats and let them dry fully.

Once you're ready to etch, the same instructions apply as in step 6 except this time instead of placing your hand into the laser engraver you should place a pad of double sided padded sticky tape on top of the temporary tape engraving, this helps the nail stay in place while the machine vibrates. When you send the file over the settings to use are 35% speed and 100% power. Two passes are necessary to get a nice clean etch.

Bloopers

P1070342.JPG
P1070344.JPG
sports-blooper.jpg
Instructables.com interns.
We make the mistakes so you don't have to. Please enjoy this video, it cost me many skin cells to make.



This concludes the Clash of Titans, or how to add life to dead hands, or Thumbnail portraits. I hope you find something interesting in this instructable, or find a way to pimp your nails in a new manner. Stencils?

March on.
-BG!