Thermal Detonator
This is tutorial about my new weapon replica from "Star Wars" made for my mandalorian costume
http://vk.com/video107082241_456239036
Start
What you need:
1) Two small batteries 3v
2) Three LEDs and resistors for them
3) switch
4) Package for raincot
5) Silver and black (acrylic) paints
6) Super glue
7) rasp (Sorry, i don't if i could name this tools like this. If you don't understand, this is translator's mistake)
8) cold welding
1) Two small batteries 3v
2) Three LEDs and resistors for them
3) switch
4) Package for raincot
5) Silver and black (acrylic) paints
6) Super glue
7) rasp (Sorry, i don't if i could name this tools like this. If you don't understand, this is translator's mistake)
8) cold welding
Shape
Using rasp you should make relief like you saw in movie. After that make the simpliest LED lamp and cut off a hole for it in your basis
Next
Cut off a track for your switch and put there the screw with a nut (second photo). Glue together your halfs, don't forget to add electronics ;)
Final
Using cold welding make a button and glue on a nut as you see it in the picture. Paint your model
Thank you for your attention
Good luck!