The Spectre M4 Ruber Band Gun V. 1.3 Is Here!
by osi in Living > LEGO & K'NEX
5378 Views, 8 Favorites, 0 Comments
The Spectre M4 Ruber Band Gun V. 1.3 Is Here!
the next line in my ruberband guns the spectre m4 which is a sub machine gun i
V. 1.2= there are mods to make it hold more rubber bands, I don't have pictures, but I did try to make it as clear as possible to what you do.
V. 1.3= there is a mod for full auto, it is not that useful though, considering they all shoot at once. someone will find it useful though.
V. 1.2= there are mods to make it hold more rubber bands, I don't have pictures, but I did try to make it as clear as possible to what you do.
V. 1.3= there is a mod for full auto, it is not that useful though, considering they all shoot at once. someone will find it useful though.
Parts List
These will be the parts that you will need to complete the basic version of this gun.
rods:
green-52
white-37
blue-33
yellow-4
connectors:
dark gray-6
light gray-4
orange-6
red-15
green-18
yellow-30
blue 3d-10
white-13
to build version 1.2 you need another white connector and 8 white rods
to build version 1.3 you need two less green rods
rods:
green-52
white-37
blue-33
yellow-4
connectors:
dark gray-6
light gray-4
orange-6
red-15
green-18
yellow-30
blue 3d-10
white-13
to build version 1.2 you need another white connector and 8 white rods
to build version 1.3 you need two less green rods
The Triger Area
follow the pictures
This is were the mods take place so pay attention to the boxes
1-2 two veiws of the same peice
7-8 two veiws of the same part
15 is puting the blue rod through the triger and body
16 do this to both
17 put this through the green conectors
20 should look like this
21 add this
22 to the other side
This is were the mods take place so pay attention to the boxes
1-2 two veiws of the same peice
7-8 two veiws of the same part
15 is puting the blue rod through the triger and body
16 do this to both
17 put this through the green conectors
20 should look like this
21 add this
22 to the other side
The Handle
follow the pictures
2 there are 4 blue spacers
2 there are 4 blue spacers
The Guard and Mag (for Looks)
follow the pictures
1-2 same part diferent veiws
3-5 same part diferent veiws
9 put it together
1-2 same part diferent veiws
3-5 same part diferent veiws
9 put it together
The Barrel
follow the pictures
all pictures are the same part
all pictures are the same part
Front Handle
follow the pics
all same part
all same part
Ruber Band Placement and Shooting
1 conive the rubber band on some how
1-3 how to place it
4 pull the gear back
5 put a nother one on
have fun
V. 1.1 was a folding stock that well, was quite bad.
if you make V. 1.2, you increase your ammo hold by 5 bands.
Once again i do not recommend V. 1.3 because of the fact that it makes the gun single shot.
Next up the Dur-24 wrist rbg shotgun.
1-3 how to place it
4 pull the gear back
5 put a nother one on
have fun
V. 1.1 was a folding stock that well, was quite bad.
if you make V. 1.2, you increase your ammo hold by 5 bands.
Once again i do not recommend V. 1.3 because of the fact that it makes the gun single shot.
Next up the Dur-24 wrist rbg shotgun.