The Skateboard Light.

by dkrisztián in Circuits > LEDs

624 Views, 7 Favorites, 0 Comments

The Skateboard Light.

20141122_172100.jpg
Tippek-tervek-ötletek

Will not last long to build this.at 30 min.Almost no cost. Good work!!

Required the Following Things

20141122_163829.jpg

-insulating tape

-3 led

-screwdriver

-1 wood panel

-9V rechargable/normal battery

-9V jack

-8pcs. screw

-4 fixer

-a pencil

Draw Locations

20141122_165532.jpg
20141122_165058.jpg
20141122_163958.jpg

Draw the hols location and LED'S.

Palace on the Board the Wood Panel

20141122_170039.jpg

It will not appear on the other side of the board screw.

Palace

20141122_171331.jpg
20141122_170715.jpg

Put the reservoir leds and the battery case

Behold, the End Result. Watch the Finish Video

20141122_172100.jpg

Connect the leds in the battery.The cables attach it to the axis of the board.