The Witch King of Angmar Wood Burner

Remove the paint from your bottle and sketch out your design. I use a grinder and ultra thin cutting disc to start cutting out the design.

I used a piece of 4" box section to create the helmet part of the design, this was nice and rusty which gave the design an authentic look.

I used some 1" pipe to create the spikes around the helmet. The burner had two chimneys to start.

The burner looked great lit up but the flames were firing out of the eyes rather than the chimney and blacking up the helmet.

I added another chimney to give this sucker 3 chimneys. I masked up the rusty helmet part of the burner and hit the burner with 3 coats of Ultra High Temp black, I then gave the rusty helmet 3 coats of UHT clear coat.

Build your fire, light and enjoy...


Check out my work at

https://www.facebook.com/pages/Burned-by-Design/1526857080886471

All commissions considered...this one is for sale...