The Web Pendant Tutorial

I've got another wire jewelry tutorial! I call this the web pendant :)

Cut 4 pcs of 3 inches 22ga wire. Fold 2 wires in half like a "V" shape.

Wrap one "V" shaped wire by bending the wire in opposite directions like shown in arrow. By doing so your wire will interlock.

Wrap your 3rd wire by bending the wires in opposite directions like shown in arrow.

Wrap your 4th wire and try to straighten each wire and adjust to have even spaces.

Once your web frame is ready, from a spool of 28ga start wrapping onto the web frame. Go all the way around until you have have 1.5cm of each web frame unwrapped. Trim the web frame if needed.

Slide in a round bead then bend the wire and then create a loop.

Do the same for all the wires. To cover the wire knots at the center weave some round beads using your 28ga wire. Attach a jump ring and you're done! Hope you like it :)

Visit my blog to see more pictures and instructions.