The Transport Belt

Are you looking for a transport belt?

Well, this is a project using cheap materials and not too many tools, it doesn't take too much time, and it's a great way to use your time in.

Materials:

- Supports
- Tubes

- Lids

- Motors 12V

- Screws

- Pleather

Tools:

- Screwdriver
- Ruler

- Glue for plastics

- Silicone gun with silicone bars

- Drili

- Cutter

- Soldering

- Tin (for solding)

First we made a hole in all the lids and the pasted them on both top of the tube. So, they could fit in the suppports.

Then, we put the supports on the table with the tubes on them, so they can go around.

Then we put one motor on each side of the stucture. So, we used only two motors to make all the machine work.

After that, we pasted the cables of copper with tin to make that the energy don't get out of the circuit. We just two switchers, one on each circuit cause we didn't know how to combine the two circuits.

In the end, we cut the pleather very carefully trying no to exceed the meters of the space we got, because there have to be friction. So we cut it and paste sticks on it to give it stability and make the machine could carry on heavier things.