The Three Headed Battery
![Screenshot 2021-05-26 2.05.39 PM.png](/proxy/?url=https://content.instructables.com/F3P/RGK0/KP5V8KSA/F3PRGK0KP5V8KSA.png&filename=Screenshot 2021-05-26 2.05.39 PM.png)
Today I have made something with three light bulbs and called it The Three Headed Battery. The supplies you need are down below. I hope you all like it. =}
Supplies
A Coin Battery CR 2032 2.0V, 3 Light Bulbs, A Light Switch, 1 Red Wire, and 6 Green Wires.
The Battery
![Screenshot 2021-05-26 1.34.10 PM.png](/proxy/?url=https://content.instructables.com/FUT/E5VO/KP5V8KSH/FUTE5VOKP5V8KSH.png&filename=Screenshot 2021-05-26 1.34.10 PM.png)
In the first step all you need is a battery.
The Switch and Wire
![Screenshot 2021-05-26 1.43.38 PM.png](/proxy/?url=https://content.instructables.com/FBX/2B8K/KP5V8KSG/FBX2B8KKP5V8KSG.png&filename=Screenshot 2021-05-26 1.43.38 PM.png)
![Screenshot 2021-05-26 1.44.30 PM.png](/proxy/?url=https://content.instructables.com/FUP/IVLZ/KP5V8KSF/FUPIVLZKP5V8KSF.png&filename=Screenshot 2021-05-26 1.44.30 PM.png)
In this step you will need to get a switch. Then take you red wire and connect one end to the battery and one to the switch.
The Three Heads
![Screenshot 2021-05-26 1.49.54 PM.png](/proxy/?url=https://content.instructables.com/F4N/R0FV/KP5V8KSD/F4NR0FVKP5V8KSD.png&filename=Screenshot 2021-05-26 1.49.54 PM.png)
In this step you just need to get the three light bulbs. Or like I like to call them, the three heads.
The 3 That Where Green
![Screenshot 2021-05-26 1.51.11 PM.png](/proxy/?url=https://content.instructables.com/FCL/EEH7/KP5V8KSC/FCLEEH7KP5V8KSC.png&filename=Screenshot 2021-05-26 1.51.11 PM.png)
Then take 3 green wires and connect one side to the light bulb and one to the battery.
The Final 3
![Screenshot 2021-05-26 1.53.04 PM.png](/proxy/?url=https://content.instructables.com/FIA/PAX0/KP5V8KSB/FIAPAX0KP5V8KSB.png&filename=Screenshot 2021-05-26 1.53.04 PM.png)
Ok this is the final step to pay attention. In this you will need to to first take that last 3 green wires and connect one side to a light bulb. Then take the other side and connect them to the same connector on the switch. Make sure that they are on the middle connector, all of them.
Now You Done
![Screenshot 2021-05-26 2.20.01 PM.png](/proxy/?url=https://content.instructables.com/F2B/95TC/KP5V8L3W/F2B95TCKP5V8L3W.png&filename=Screenshot 2021-05-26 2.20.01 PM.png)
Ok so when you are done and turn the Three Headed Battery on, It should lock like this.