The Star of Glory Skateboard

a cool rectangular board

two semicircular planks

two supporting spindles,

four unique pulleys

two shafts.

First of all, we need a flattened semicircular

tube, which is cut with a hollow semicircular tube to get a smooth arc bottom plate.

And turn it upside down.

After that we can install the wheels to it, so make a base first.

Install it on the finished floor

And fixed it with screws.

Then we install the bracket of the skateboard wheel (made of two tripyramid splits).

Then we continued to install fixtures and reinforce the wheels.

As a result, the fixing frame of the wheel was installed

Then we can install the wheels.

Splice them together

Then you can add some decoration, such as pentagram, ring, can have a better effect.

After that, we will install the bottom plate copy, and adjust the splicing, get the complete skateboard bottom plate.

Next, we'll put the fabricated wheels on.

And make some trimming of it to achieve more realistic effects (such as bracket or reduction).

After that we have to make the skateboard complete and make the skateboard more perfect. so we need a semicircle column to lower the height to match the previous bottom plate.

Then use a hollow cuboid to cut it in a similar way to the first step.

Then it can be connected to the previous floor and match. So splice it up and add some pattern embellishment. Such a skateboard will come to fruition.