The Splatter 6-Wheel Vehicle

We are going to teach you how to make a 6-Wheel Splatter Vehicle that splatters people with ink (it doesn't have to be people). :D

1. 2 wooden blocks or 1 big wooden block

2. 2 4-battery holders (with on-off switch)

3. 1 2-battery holder (with on-off switch)

4. 7 motors (relatively small)

5. Hot Glue

6. Tape

7. 1 Markers

8. Hot glue sticks

9. Cardboard or Foam material (for the wheels)

10. Scissors

Glue 2 wooden blocks together.

Hot Glue the battery packs on. Make sure that you leave some space on the bottom for the wheels.

Cut out 12 cardboard circles that are relatively small.

Use the motor and poke a hole in 6 of the circles. (only 6! (not 6 factorial))

Insert some hot glue into the holes.

Put the cardboard circles back onto the motors.

Hot glue the other 6 cardboard circles on the already glued wheels. (like a double layer) This makes sure that the wheels can support the weight of the entire vehicle.

Hot glue the motors on the bottom of the vehicle.

Wire the motors so that they all turn in the same direction.

You have one more motor left. Glue it at the front top of the vehicle. Then drill a hole on the back of the marker. Put a bit of hot glue inside of the hole and stick it into the motor. It will splatter even with the cap on! Well, have fun! :D

Your project is done! Enjoy! Have fun splattering people! :D