The Scare Machine

This is DIY project which is basically can be used in a horror house or used in hollowed for kids to use it.

What Happens?

When an individual will see through the machine there will be a scary sound playing in the background and a scary face pulling up using a motor and LED embedded.

1) Cardboard Box

2) Alligator Clips (Red & Green)

3) Wires (Red & Green)

4) 12V Battery

5) Motor

6) Makey Makey

7) Aluminium Tape (Conductive Tape)

8) Cutting mat

9) Paints (Optional)

10) Tape

11) Wire Stripper

12) Cutter

13) Fishing Wire

Take the cardboard box and place it vertically. Which means having the opening and closing facing you and not up/down. You can see the position of the box in the picture above to.

On top center of the box using a skewer and fit a fishing wire through it and roll it up on the motor, so that when the motor works the fishing wire is pulled up/ down. This will be where the LED embedded scary face will be pulled. After this step the box should look as in the picture

See the diagram above and at this stage your project should look something like in the diagram above