The Rat Race Board Game

The exact dimensions of the board game.

The plastic filament of different colors - is to be printed in a 3D printer.

Two 40cm x 40cm wood boards - one to be cut in the laser to then later get glued to the other one.

Glue - to glue the boards together and paper to cards

Cards - pictures/texts are glued to them

Paper - to print pictures & texts in a normal printer

Play Money - $1 to $100 x 20 each

4 Characters:

1 - https://sketchfab.com/3d-models/iron-man-mark-85-8da781aa74024366844b36444c650d69

2 - https://cults3d.com/en/3d-model/art/arnold-schwarzenegger-3d-model-ready-to-print-3d-print-model-3d-print-model

3 - https://discord.com/channels/@me/1080573944601509898/1083265511938334730

4 - https://www.turbosquid.com/3d-models/3d-ionic-column-1644312

+ 1 Dinosaur (T-rex) of choice

Buildings:

House - https://sketchfab.com/3d-models/simple-house-b480ce383ac4425a9bf3694842d3937e

Skyscraper - https://www.cgtrader.com/free-3d-models/exterior/skyscraper/mid-poly-skyscraper-3d-model-1401214a-3c33-4efa-97d5-0c7032fd1b3e

Vehicles:

Supercar 1 - https://free3d.com/3d-model/bugatti-chiron-2017-model-31847.html

Supercar 2 - https://free3d.com/3d-model/airplane-v2--549103.html

Jet - https://free3d.com/3d-model/learjet-25-atlasjet-42833.html

*These are converted to .stl files in order to be printed

The laser is used to do that

Each side of the rectangle board is divided into 10 squares (a total of 40 each 3.33cm in length). Then 20 land pictures are glued to the board (5 on each side of it), 10 resource pictures, 6 question marks, and lastly the start and the place where the 3D printed dinosaur going to be there was glued.